Exported to 120+ Countries Worldwide.Learn More +
Aerial Work Platform

BOB-LIFT Product Range

Aerial Work Platform

Aerial Work Platform from the BOB-LIFT product catalog.

Showing 5 of 5 products

Sort by:

About our aerial work platforms

An aerial work platform lifts workers and their tools to a safe working position at height. BOB-LIFT's aerial work platforms are truck mounted, so the platform travels on its own chassis and is ready to work when it arrives on site.

Our range sits in the truck mounted aerial work platform category, with five working heights: 18 m, 28 m, 30 m, 35 m and 40 m. Typical jobs for this type of platform include building maintenance, street lighting, power line repair, signage and facade work. The platforms are built at our 37,000 m² factory in Xuzhou, China, which exports to 120+ countries.

Choose by the highest point you need to reach and how far the platform must reach out from the truck, for example over a sidewalk or a fence. Leave a margin above the work point so the crew is not working at the platform's limit. Then send us the chassis you prefer and the job details. Our truck mounted aerial work platform page lists each model.

Compare the range

Figures from the BOB-LIFT technical sheets. Confirm the configuration for your truck or vessel with our team.

Model Truck Mounted 18-Meter Aerial Work Platform Truck Mounted 28-Meter Aerial Work Platform Truck Mounted 30-Meter Aerial Work Platform Truck Mounted 35-Meter Aerial Work Platform Truck Mounted 40-Meter Aerial Work Platform
Capacity 18 t 28 t 30 t 35 t 40 t
Working Height 18 m 28 m 30 m 35 m 40 m
Boom Type Custom Solution Custom Solution Custom Solution Custom Solution Custom Solution

From steel
to shipment.

Photographed at our factory in Xuzhou, Jiangsu: the steps a crane goes through before it leaves.

Parts and hydraulics
01 / 10 Parts and hydraulics Boom sections, cylinders, frames and hydraulic parts are staged next to the assembly line.
Parts and welds
02 / 10 Parts and welds Boom sections, cylinders and hydraulic parts are checked in the workshop before and during assembly.
Assembly halls
03 / 10 Assembly halls Knuckle and telescopic booms are assembled in long rows under overhead cranes.
Load and function test
04 / 10 Load and function test The finished crane is mounted on the test bay and runs through lifting, slewing and outrigger functions under load.
Lift the crane onto the chassis
05 / 10 Lift the crane onto the chassis An overhead hoist holds the crane while it is placed on the truck frame in the workshop.
Fix the crane to the frame
06 / 10 Fix the crane to the frame Technicians work under the cab to secure the crane base to the chassis.
Check the finished truck
07 / 10 Check the finished truck The crane stands complete on the truck with its boom raised for inspection.
Line up the order
08 / 10 Line up the order Every crane in an order is tested, set on its base or a pallet and lined up in the hall before packing.
Wrap the crane
09 / 10 Wrap the crane Cranes that ship without a chassis are wrapped in stretch film before they leave the workshop.
Load the container
10 / 10 Load the container A hoist or a forklift moves each packed crane into the container.

Mini loaders and dumpers

Mini skid steer loaders, mini dumpers and attachments, on the BOB-LIFT loader site.

Visit bobliftloader.com

You are leaving this website

· Official BOB-LIFT website

This is one of our own websites, run by BOB-LIFT. It opens in a new tab, so this page stays open for you.