BOB-LIFT will exhibit at bauma CHINA 2026 in Shanghai from 24 to 27 November, on outdoor stand H.03 at the Shanghai New International Expo Centre (SNIEC). We are bringing the CC85 forklift fly jib crane, our new SQ1Z-ER electric mini crane, three truck-mounted cranes and one mini skid steer loader. Our team can run lifting demonstrations on request.
Key takeaways
- bauma CHINA 2026, 24–27 November, SNIEC Shanghai, outdoor stand H.03.
- Focus machines: the CC85 forklift fly jib crane and our new SQ1Z-ER electric mini crane, shown alongside the SQZ800, SQ8SA4 and BLZ90K4.
- Lifting demonstrations on request; book a meeting through our contact page and we pass it to the team on the stand.
bauma CHINA 2026 at a glance
| Show | bauma CHINA 2026 |
|---|---|
| Dates | 24–27 November 2026 |
| Venue | Shanghai New International Expo Centre (SNIEC), 2345 Longyang Road, Pudong, Shanghai |
| Our stand | Outdoor area, stand H.03 (100 m²) |
| On the stand | CC85, SQ1Z-ER electric mini crane, SQZ800, SQ8SA4, BLZ90K4, BL-T460-H |
| Meetings | Book through our contact page; we pass it to the team on the stand |
bauma CHINA is the international trade fair for construction machinery, building material machines, mining machines and construction vehicles, organised in Shanghai every two years by Messe München (bauma CHINA). For international buyers, it is an efficient opportunity to compare Chinese equipment manufacturers, inspect machinery closely and negotiate specifications in a single visit.
bauma CHINA runs on two sites this year. The SNIEC site, where we are, carries the construction machinery and vehicles. Visitor registration is on the official bauma CHINA website.
BOB-LIFT is listed in the official bauma CHINA 2026 exhibitor directory at SNIEC Outdoor H.03, with our company profile and exhibits.
Getting there: Metro Line 7 stops at Huamu Road station, right next to SNIEC (venue directions). From central Shanghai, take Line 2 to Longyang Road and change to Line 7. Our stand is in the outdoor area, so follow the outdoor exhibition signs once you are inside.
Our stand design
The rendering below shows how stand H.03 is laid out: the meeting room with the BOB-LIFT canopy on one side, a truck-mounted crane along the 12.5 m long edge, and the display machines in the 9 m area between them.
Two machines to look for
A forklift fly jib crane is a lifting attachment that slides onto the forks of a forklift truck, so the forklift can hook and lift loads like a small crane.
CC85 forklift fly jib crane
The CC85 forklift fly jib crane turns a 3 t or 3.5 t forklift into a small crane. It is rated at 2.3 t, reaches 5.4 m and lifts to 8.4 m on a 3 m mast or 9.9 m on a 4.5 m mast. The unit weighs 560 kg, and the series holds a CE certificate of conformity under the EU Machinery Directive 2006/42/EC.
It suits warehouses, workshops and yards that already run forklifts and need to lift loads a fork cannot reach, such as moulds into a press or parts into a pit. On the stand you can see how it mounts on the forks and how the folding, telescopic boom moves.
For example, a workshop that already owns a 3.5 t forklift can place a die into a press without hiring a mobile crane.
SQ1Z-ER electric mini crane (1 t, wireless remote)
On the stand is the SQ1Z-ER, the 1 t wireless-remote version of our new electric mini crane. It is a battery-powered folding-boom crane that is lighter and easier to fit than our pickup truck cranes. It runs on a 12 V DC supply, slews 360°, bolts onto a vehicle bed or a fixed base, and is rated at 1 t at 1.2 m. You operate it from a handheld wireless remote, so you can stand wherever you see the load best. The same crane also comes with manual levers (SQ1Z-EM), and there is a 2 t size, the SQ2Z-E. On the stand you can watch the boom fold, extend and slew, and check the mounting footprint against your own vehicle.
Knuckle boom and telescopic truck-mounted cranes on the stand
A truck-mounted crane is a hydraulic crane installed on a truck chassis, usually behind the cab, so the vehicle carries the load and lifts it on site. Knuckle boom cranes are folding designs that reach over obstacles and stow compactly, while telescopic boom cranes extend in a straight line for simple, fast lifts.
| Model | Type | Rated load | Max. lifting moment |
|---|---|---|---|
| SQZ800 | Knuckle boom | 40 t | 80 t·m |
| SQ8SA4 | Telescopic boom | 8 t | 20 t·m |
| BLZ90K4 | Knuckle boom | 4.6 t | 90 kN·m |
All three will be in our standard red with standard configurations. The BLZ90K4 was also on our stand at the 140th Canton Fair in October. If you missed it there, Shanghai is your next chance to see it.
Consider bringing your truck model and typical load weights, because the team can then compare the three cranes against your actual work.
Lifting demonstrations
Ask the team at the stand and we will run a crane through a lift for you. Demonstrations happen when visitors ask for them, so there is no fixed timetable. If you want to see a particular model working, mention it when you book a meeting and we will plan for it.
Talk to our technicians on the stand
Our technicians will be at stand H.03 throughout the show, not only our sales team. Bring your vehicle model, its chassis details and the loads you lift most often, and they can help you choose a crane size, plan the mounting and answer questions about installation, operation and maintenance. If you are still comparing options, they can talk you through the differences between the knuckle boom, telescopic and electric mini cranes on the stand.
Also on the stand: a mini skid steer loader
Our sister brand BOB-LIFT Loader is bringing the red BL-T460-H tracked stand-on mini skid steer loader, and you can try it at the same stand. Read more on the BOB-LIFT Loader bauma CHINA page.
Book a meeting
To book a time at the stand, send us a message through our contact page by enquiry form, email or WhatsApp. Tell us which machines you want to see and which day you plan to visit. We will pass your request to our team on the stand, and they will confirm a time with you.
If you cannot make it to Shanghai, the same page works at any time, and you can also arrange a visit to our factory in Xuzhou.
